Prosys Contact

Robotics and robotics coding

From robotics coding solutions to robot control software, we design systems that move.

Our approach

Robotics needs mechanics, electronics and software to work correctly at the same moment. At Prosys those three disciplines sit at the same project table.

Our work centres on two areas: solutions that make robotics coding learnable, and control software for robots working in the field.

What we do

  • Robotics coding solutions

    We develop hardware and software that teach coding and robotics skills through hands-on practice.

  • Robot control software

    We write software that manages a robot's movement, task sequence and safety limits.

  • Sensor and motion systems

    We build the electronics and software layers that read sensor data and drive motors precisely.

  • Computer vision

    We develop camera-based recognition and positioning so a robot can perceive its surroundings.

  • Prototype development

    We turn an idea into a prototype that can be tried, and mature it with data from the field.

How we work

  1. Step 1

    We listen to the need

    Together we pin down the goal, the constraints and how success will be measured.

  2. Step 2

    We draw the architecture

    Software, hardware and data flow are designed on a single plan.

  3. Step 3

    We build and test in the field

    We move in short cycles and test every stage under real conditions.

  4. Step 4

    We launch and stay with you

    Deployment, monitoring and maintenance remain with the same team.

Frequently asked questions

Who are your robotics coding solutions for?

We work with institutions that teach robotics and coding, and with companies that want to develop products in this field. We define the scope together according to the age and level of the audience.

Do you develop both the robot's hardware and its software?

Yes. Board design, embedded software and high-level control software are developed by the same team, so the parts fit together without friction.

What stages does a robotics project go through?

The need and operating environment are defined, the architecture is drawn, a prototype is built and tested in the field, and then the product is put into service. The output of each stage is reviewed with you before the next begins.